3-way self-powered Line Array system of high performance equipped with two (2) speakers of 12” and two (2) speakers of 6,5" in a tuned enclosure. The HF section has three (3) compression drivers of 1” coupled to a waveguide. The transducer configuration generates a symmetric and horizontal coverage of 80º without secondary lobes over the entire frequency range. Ideal as main PA system for outdoor events or permanent installation where its necessary a high performance and SPL.
It is excellent to be combined with GTA 218 B or GT 221 B.
EASE FOCUS prediction software is available. Click here to download GLL files for Ease Focus V.2.
GTA 2X12 L.A. incorporates a Class D amplifier module of last generation Pro DG Systems GT 4.0, it can amplify itself and another passive unit GT 2X12 L.A. (in slave mode). Click here to see more information about GT 4.0.
F / Case for transport 4 units GTA 2X12 L.A. is available.
Dolly board and protection cover for transport 4 units GTA 2X12 L.A. is available.
Power Handling: 1900 W RMS (EIA 426A standard) 3800 W programme / 7600 W peak.
Nominal Impedance: Low 16 Ohm / Mid 16 Ohm / High 24 Ohm (one unit) - Low 8 Ohm / Mid 8 Ohm / High 12 Ohm (together with one unit GT 2X12 L.A.)
Average Sensitivity: 101 dB / 2.83 V/1m (average 100 - 18000 Hz wideband).
Maximum SPL Calculation: / 1m 131 dB continuous / 134 dB programme / 137 dB peak (one unit) / 134 dB continuous / 137 dB programme / 140 dB peak (four units).
Frequency Range: +/- 3 dB from 50 Hz to 19 KHz.
Nominal Directivity: 80º of horizontal coverage, vertical coverage depending of the length and array configuration.
Low Frequency Driver: Two (2) Beyma speakers of 12”, 8 Ohm, 600 W, 330,2 mm (3”) with high temperature voice coil on glass fibre former.
Mid Frequency Driver: Two (2) Beyma speakers of 6,5”, 8 Ohm, 250 W, 165 mm (2”) with high temperature voice coil on glass fibre former.
High Frequency Driver: Three (3) Beyma drivers of 1”, 8 Ohm, 60 W, 25 mm exit (44.4 mm) with voice coil Mylar diaphragm.
Recommended Amplifier: Pro DG Systems GT 4.0 into the Cabinet
Connectors: 2 X XLR + 1 NL8MP speakon connector. USB-Ethernet connectors + 2 X Powercom.
Cabinet: CNC model, 15 and 18mm made from birch wood plated on the exterior.
Finish: Special paint finish in black.
Cabinet size: (HxWxD); 370x1070x445mm (14,57”x42,13”x17,52”).
Weight: 67,5 Kg (148,81 lbs) net weight / 68,6 Kg (151,24 lbs) gross weight with packaging.