The New IT-A 212 P.A. is a high performance multipurpose self-powered system of 2-way equipped with one (1) speaker of 12" in a tuned enclosure. The HF section has one (1) compression driver of 1/4”. Ideal as sonorous reinforcement for all the systems from the lT-A Series.
The new IT-A 212 P.A. incorporates a rotating diffuser with coverage: 80º x 50º, to be used individually or to work horizontally stacked or flown with two or more units together as X-Array system of constant curvature, or vertically adapted thanks to its special flight hardware to also work as a Line Array system.
Excellent to be used as main P.A, frontfill and sidefill with or without subwoofer, as portable system, in permanent installation, or as monitor for voice and instruments. IT-A 212 P.A. incorporates an amplifier module GT 1.2 V which allows amplify itself, and another passive unit IT 212 P.A. in slave mode.
It is excellent to be combined with GTA 118 B or GTA 218 B, which allows different configurations of high performance and SPL.
EASE FOCUS prediction software is available. Click here to download GLL file for Ease Focus V.2.
F / Case for transport 4 units IT-A 212 P.A. is available.
Dolly board and protection cover for transport 4 units IT-A 212 P.A. is available.
Power Handling: 600 W RMS (EIA 426A Standard) / 1200 W program / 2400 W peak.
Nominal Impedance: 8 Ohm
Average Sensitivity: 100 dB / 2.83V / 1m (average of 150 - 16000Hz wideband).
Calculated Maximum SPL: / 1m 130 dB continuous / 133 dB program / 136 dB peak.
Frequency Range: +/- 3dB from 40 Hz to 18 KHz.
Nominal Directivity: 80x50 rotating diffuser.
Low / Mid Frequency Driver: One (1) Beyma speaker of 12", 8 Ohm, 500 W, 330.2mm of diameter with high temperature glass fiber voice coil.
High Frequency Driver: One (1) Beyma driver of 1/4”, 8 Ohm, 100 W, 36 mm exit (44.4mm) with voice coil Mylar diaphragm.
Recommended Amplifier: Pro DG Systems GT 1.2 V into the cabinet
Rigging points: 12 x M10
Connectors: 2 X XLR + 1 NL4MP speakon connectors. USB-Ethernet + 2 X Powercom.
Acoustic Enclosure: CNC model, 18-15mm made from birch plywood plated on the exterior.
Finish: Standard finish in black paint of high weather resistance.
Cabinet Dimensions: (HxWxD); 690x390x380mm (27,16”x15,35”x14,96”).
Weight: 26 Kg (57,32 lbs) net / 27,2 Kg (59,97 lbs) with packaging.