News Bulletin
Subscribe to our newsletter and receive your mail in all our news
MA Series
New MA 15

The New MA 15 is a 2-way multipurpose self-powered system equipped with one (1) speaker of 15" in a tuned enclosure. The HF section has one (1) compression driver of 1”, coupled to one (1) rotating diffuser of 60X40. MA 15 has been redesigned to offer an improved ergonomics and appearance.


This multipurpose system which has been also designed to be used as stage monitor is perfect to use as P.A, frontfill and sidefill with or without subwoofer, as portable system or permanent installation. Excellent as sonorous reinforcement for all our systems. Ideal for all type of full-range applications thanks to its high performance and wide frequency range.


MA 15 incorporates amplifier module GT 1.2 H, which offers the advantage of amplify itself and another passive unit M 15 in slave mode, allowing an unprecedented amplification capacity.


DSP Software is available. Click here to redirect to the download link of this software. Consult our Technical Service for more information.


Integrated hardware and all type of installation accessories and equipment are available to offer the maximum interaction with our different systems.




Power Handling: 750 W RMS (EIA 426A standard) / 1500 W programme / 3000 W peak.

Nominal Impedance: 8 Ohm.

Average Sensitivity: 100 dB / 2.83 V/1m (average 150 - 16000 Hz wideband).

Maximum SPL Calculation: / 1m 129 dB continuous / 132 dB programme / 135 dB peak.

Frequency Range: +/-3 dB from 50 Hz to 18 KHz.

Nominal Directivity: 60x40 rotating diffuser.
Low / Mid Frequency Driver: One (1) Beyma speaker of 15”, 8 Ohm, 700 W, 406 mm of diameter with high temperature glass fiber voice coil.

High Frequency Driver: One (1) Beyma driver of 1”, 8 Ohm, 50 W, 25mm exit (44.4 mm) with voice coil Mylar diaphragm.

Recommended Amplifier: Pro DG Systems GT 1.2 H into the cabinet.

Rigging Points: 9 x M8
Connectors: 2 X XLR + 1 NL4MP speakon connectors. USB-Ethernet + 2 X Powercom.

Acoustic Enclosure: CNC model, 18-15mm made from birch plywood plated on the exterior.

Finish: Standard finish in black paint of high weather resistance.

Cabinet Dimensions: (HxWxD); 755x435x395mm (29,72”x17,13”15,55”).

Weight: 30,8 Kg (67,90 lbs) net / 32 Kg (70,55 lbs) with packaging. 

© 2016 PRO DG Systems
HOME · Legal · Contact