Brawn with brains.
Delivering 2 x 1200 W at 4 ohms, IPD 2400 packs reliable power and performance into 1U. At the heart of the IPD platform is a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency.
The DSP also provides extensive protection for your loudspeaker system, in the form of the innovative software-controlled Speaker Protect Limiter, configured with ease from within IntelliDrive Controller software. Harnessing all of this power is child’s play thanks to the IPD LoadLibrary, a collection of Lab.gruppen released presets.
Take control, at the rack or anywhere
All setup parameters for input mixing, DSP features and limiter setting are accessible on the front panel using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available. Up to 100 user-defined presets may be stored on-board.
Most users will also want to take advantage of the advanced, Ethernet-based networked monitoring and control features. Network configuration is fast and foolproof, with automatic discovery and identification of all connected amplifiers. The sleek GUI is designed for touch-based devices, and enables quick grouping of amplifiers along with intuitive setup and preset storage of all DSP parameters.
Exceptional I/O flexibility
With AES3 digital inputs standard, IPD 2400 connects directly to digital console stage boxes, or accept AES input within a fixed digital network installation, eliminating a D-A/A-D conversion cycle. Additionally, AES3 inputs can be set for automatic fail-over to analog (perfect for keeping the show going, or in case of installations – maintaining system integrity for mission-critical PA/VA system applications), and input mixing is available for all four inputs. At the power output end, connections are available on binding posts or Neutrik speakON.
Number of channels: 2
Max total output all channels driven: 2400 W
Peak output voltage per channel: 70 Vrms
Max output current per channel: 20 Arms
Max output power all channels driven
2 ohms: 800 W
4 ohms: 1200 W
8 ohms: 600 W
16 ohms: 300 W
THD 20 Hz - 20 kHz at 1W: <0.1%
THD at 1 kHz and 1 dB below clipping: <0.05%
Signal to Noise Ratio: >102 dBA
Channel separation (Crosstalk) at 1 kHz: >80 dB
Frequency Response: 2 Hz – 42 kHz
Input impedance: 18 kOhm
Common Mode Rejection (CMR): 50 dB
Output impedance: 25 mOhm
Gain, Sensitivity and Limiters
SCVPL: 100 V peak
Sensitivity for full power: 6 dBu
Gain (all DSP controls set to 0 dB): 33.2 dB
Level adjustment (per channel): Software controlled from -inf to 0 dB
Connectors and Buttons
Analog input connectors (per ch.): Neutrik XLR, 3pin female
Analog input link connectors (per ch.): Neutrik XLR, 3pin male
AES input connectors (per ch.): Neutrik XLR, 3pin female
AES input link connectors (per ch.): Neutrik XLR, 3pin male
Output connectors (per ch.): Neutrik speakON / binding post
Buttons: Power, Menu, Back, Mute (per ch.), Power
Encoder: Adjust / Set
Cooling: Dual fan, front to rear airflow, no filter required, temperature controlled speed
Nominal voltage: 100 – 240 VAC
Operating voltage: 60 – 265 V AC
Standby consumption: <7.5 W
Mains connector: IEC inlet
Dimensions - Finish
Dimensions (Rack rail to rear panel): W: 483 mm (19”), H: 44 mm (1 U), D: 359 mm (14.1”)
Dimensions (Overall incl. handles and rear support): W: 483 mm (19”), H: 44 mm (1 U), D: 431 mm (17”)
Finish: Black anodized aluminum front and black / gray steel chassis
Approvals CE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15 Class A, EN 55103-1, EN55103-2, ROHS
Warranty 3 years, components and factory workmanship. See full warranty statement.